Credits: 5
Schedule: 07.01.2019 - 14.03.2019
Teacher in charge (valid 01.08.2018-31.07.2020):
Matti Pietola
Contact information for the course (applies in this implementation):
Contact person
university teacher Jyrki Kajaste
jyrki.kajaste@aalto.fi
Teacher in charge
professor Matti Pietola
matti.pietola@aalto.fi
Teaching Period (valid 01.08.2018-31.07.2020):
III - IV (Spring 2019)
Learning Outcomes (valid 01.08.2018-31.07.2020):
After the course the student is able to:
- Describe technical fundamentals of hydraulic and pneumatic systems
- Describe general characteristics of different pressure mediums
- Analyze the behavior of pressure and flow in hydraulic and pneumatic systems
- Describe the operation and control of hydraulic and pneumatic components, the factors affecting to the operation, and the effect of the components to the system
- Simulate basic hydraulic and pneumatic systems using software packages
- Calculate and analyze hydraulic and pneumatic systems and to draw up diagrams
- Calculate the characteristics/properties of hydraulic and pneumatic components and systems
- Analyze operation of hydraulic and pneumatic systems
- Analyze and draw up diagrams of hydraulic and pneumatic systems
- Build simple hydraulic and pneumatic systems
- Document hydraulic and pneumatic systems
Content (valid 01.08.2018-31.07.2020):
General knowledge of fluid power systems
Theoretical background (hydrostatics and hydrodynamics)
Fluids used in fluid opwer systems
Basic components of hydraulic and pneumatic systems
Filtration
Seals and sealing
Systems
Modeling and simulation (basics for the Research tasks)
Measurements and analysis (for Laboratory exercises)
System construction
Details on the course content (applies in this implementation):
Learning Outcomes
After the course the student is able to:
- Describe technical fundamentals of hydraulic and pneumatic systems
- Describe general characteristics of different pressure mediums
- Analyze the behavior of pressure and flow in hydraulic and pneumatic systems
- Describe the operation and control of hydraulic and pneumatic
components, the factors affecting to the operation, and the effect of
the components to the system
- Simulate basic hydraulic and pneumatic systems using software packages
- Calculate and analyze hydraulic and pneumatic systems and to draw up diagrams
- Calculate the characteristics/properties of hydraulic and pneumatic components and systems
- Analyze operation of hydraulic and pneumatic systems
- Analyze and draw up diagrams of hydraulic and pneumatic systems
- Build simple hydraulic and pneumatic systems
- Document hydraulic and pneumatic systems
ContentGeneral knowledge of fluid power systems
Theoretical background (hydrostatics and hydrodynamics)
Fluids used in fluid opwer systems
Basic components of hydraulic and pneumatic systems
Filtration
Seals and sealing
Systems
Modeling and simulation (basics for the Research tasks)
Measurements and analysis (for Laboratory exercises)
System construction
Assessment Methods and Criteria (valid 01.08.2018-31.07.2020):
Lectures
Two research assignments, group work (2 x 45 %)
One individual research assignments (10 %)
Voluntary calculation exercises (bonus points)
Elaboration of the evaluation criteria and methods, and acquainting students with the evaluation (applies in this implementation):
Assessment Methods and Criteria
Lectures
Two research assignments, group work (2 x 45%)
One individual research assignment (10%)
Voluntary calculation exercises (bonus points)
Workload (valid 01.08.2018-31.07.2020):
5 cr
Lectures 28 h (2 x 2 h / week)
Laboratory work 6 h (3 x 2 h)
Simulation work 8 h (4 x 2 h)
Voluntary calculation exercises 12 h (6 x 2 h)
Autonomous studying and working on research assignments 81 - 93 h
Details on calculating the workload (applies in this implementation):
Workload
5 cr
Lectures 28 h (2 x 2 h / week)
Laboratory work 6 h (3 x 2 h)
Simulation work 8 h (4 x 2 h)
Voluntary calculation exercises 12 h (6 x 2 h)
Autonomous studying and working on research assignments 81 -
93 h
Study Material (valid 01.08.2018-31.07.2020):
Announced separately
Details on the course materials (applies in this implementation):
Substitutes for Courses (valid 01.08.2018-31.07.2020):
Course substitutes Kon-41.3023 Hydrauliikka ja pneumatiikka
Course Homepage (valid 01.08.2018-31.07.2020):
https://mycourses.aalto.fi/
Grading Scale (valid 01.08.2018-31.07.2020):
0 - 5
Registration for Courses (valid 01.08.2018-31.07.2020):
WebOodi
Further Information (valid 01.08.2018-31.07.2020):
For course news & updates please check MyCourses.
Additional information for the course (applies in this implementation):
:
WebOodi
Further Information:
For course news & updates
please check MyCourses.
Details on the schedule (applies in this implementation):
weekday | day | time | class | event | week |
Monday | 7.1. | 12:15-14:00 | 326 | lecture | 2 |
Thursday | 10.1. | 14:15-16:00 | 202 | lecture | 2 |
Monday | 14.1. | 12:15-14:00 | 326 | lecture | 3 |
Thursday | 17.1. | 14:15-16:00 | 202 | lecture | 3 |
Friday | 18.1. | 12:15-14:00 | 326 | exercise 1 | 3 |
Monday | 21.1. | 12:15-14:00 | 326 | lecture | 4 |
Thursday | 24.1. | 14:15-16:00 | 202 | lecture | 4 |
Friday | 25.1. | 12:15-14:00 | 326 | exercise 2 | 4 |
Monday | 28.1. | 12:15-14:00 | 326 | lecture | 5 |
Thursday | 31.1. | 14:15-16:00 | 202 | lecture | 5 |
Monday | 4.2. | 12:00-14:00 | Maari C-D | simulation exercise | 6 |
Thursday | 7.2. | 14:00-16:00 | Maari C-D | simulation exercise | 6 |
Friday | 8.2. | 12:15-14:00 | 326 | exercise 3 | 6 |
Monday | 11.2. | 12:00-14:00 | Maari C-D | simulation exercise | 7 |
Thursday | 14.2. | 14:00-16:00 | Maari C-D | simulation exercise | 7 |
Friday | 15.2. | 12:15-14:00 | 326 | exercise 4 | 7 |
8 | |||||
8 | |||||
Monday | 25.2. | 12:15-14:00 | 326 | lecture | 9 |
Thursday | 28.2. | 14:15-16:00 | 215 | lecture | 9 |
Friday | 1.3. | 12:15-14:00 | 215 | exercise 5 | 9 |
Monday | 4.3. | 12:15-14:00 | 326 | lecture | 10 |
Thursday | 7.3. | 14:15-16:00 | 216 | lecture | 10 |
Friday | 8.3. | 12:15-14:00 | 326 | exercise 6 | 10 |
Monday | 11.3. | 12:15-14:00 | 216 | lecture | 11 |
Thursday | 14.3. | 14:15-16:00 | 326 | lecture | 11 |