Kurssiesite

Laajuus: 5

Aikataulu: 07.01.2019 - 18.02.2019

Vastuuopettaja (voimassa 01.08.2018-31.07.2020): 

Prof. Jouni Punkki

Stuff Scientist, Fahim Al-Neshawy

Kurssin yhteystiedot (koskee tätä kurssikertaa): 

Teachers: Prof. Jouni Punkki, and Staff Scientist (D.Sc.) Fahim Al-Neshawy.
Course assistant: M.Sc. Teemu Ojala.

Opetusperiodi (voimassa 01.08.2018-31.07.2020): 

III

Osaamistavoitteet (voimassa 01.08.2018-31.07.2020): 

Upon successful completion of the course, students will be able to:

1) Identify properties of concrete in the fresh and hardened states and the effects of mineral and chemical admixtures in concrete
2) Perform suitable tests on a range of concrete design mixes using Portland cement and local aggregates
3) Theoretically predict the thermal and strength development of concrete structures
4) Apply knowledge of the principle properties of the components of normal Portland cement concrete and special concrete mixes
5) Identify the chemical or physical process of concrete structures durability concerns, and design their service life.

Sisältö (voimassa 01.08.2018-31.07.2020): 

The course covers the following topics:

- Concrete materials (Cement, Aggregates and Admixtures) and proportioning of concrete mixtures
- Cement hydration process and microstructure of the hydrated cement paste
- Properties of fresh and harded concrete
- Special concrete mixes (High strength concrete, Self-consolidating concrete, Fibre reinforced concrete etc.)
- Durability and service life of concrete structure

Tarkennukset kurssin sisältöön (koskee tätä kurssikertaa): 

	Lectures				Course book : Concrete - Microstructure, Properties, and Materials and others
Day	Date	Number	Topic
Mon	7.1.2019	Lecture 1	Introduction to concrete		Lecture notes
Wed	9.1.2019	Lecture 2	Cement and aggregates		Chapter 6 - Cement & Chapter 7 - aggregates
Mon	14.1.2019	Lecture 3	Microstructure of concrete		Chapter 2 - Microstructure of Concrete
Wed	16.1.2019	Lecture 4	Chemical admixtures for concrete		Chapter 8 - Admixtures (8.3 and 8.4)
Mon	21.1.2019	Lecture 5	Supplementary cementing materials		Chapter 8 - Admixtures (8.5)
Wed	23.1.2019	Lecture 6	Properties of fresh concrete		Chapter 10 - Concrete at Early Age
Mon	28.1.2019	Lecture 7	Properties of hardened concrete		Chapter 3 strength
Wed	30.1.2019	Lecture 8	Concrete degradation mechanisms		Chapter 5 - Durability
Mon	4.2.2019	Lecture 9	Durability and Service life design		BY 65
Wed	6.2.2019	Lecture 10	Sustainability and Recycling of concrete		Lecture notes
Mon	11.2.2019	Seminar - I	Laboratory work presentations
Wed	13.2.2019	Seminar - II	Laboratory work presentations
Mon	18.2.2018	Exam	Final Exam (13:00 - 16:00 at R1)

Toteutus, työmuodot ja arvosteluperusteet (voimassa 01.08.2018-31.07.2020): 

The grading scale for course is: 5 (highest); 4; 3; 2; 1 (lowest passing grade); 0 (failed).
The course outcome assessment includes:

a) Weekly exercises - 16% of the final grade
b) Group assignment and laboratory work - 24% of the final grade
c) Final exam - 60% of the final grade

The course grading: (Final exam 60%) +  (Weekly exercises and group assignment 40%)

Tarkennetut arviointiperusteet ja -menetelmät ja tutustuminen arviointiin (koskee tätä kurssikertaa): 

The grading scale for course is: 5 (highest); 4; 3; 2; 1 (lowest passing grade); 0 (failed).
The course outcome assessment includes:

a) Weekly exercises - 12% of the final grade
b) Group assignment and laboratory work - 13% of the final grade
c) Final exam - 75% of the final grade

The course grading: (Final exam 75%) +  (Weekly exercises and group assignment 25%)

Työmäärä toteutustavoittain (voimassa 01.08.2018-31.07.2020): 

ECTS Credit of the course 5 cr
Total workload (Hours) = 5*27 = 135h

24 h of lectures
20 h Weekly exercises and their preparation
34 h Group assignment and laboratory work
54 h individual studies
03 h Final exam

 

Oppimateriaali (voimassa 01.08.2018-31.07.2020): 

Recommended readings:
- [in English] P. Kumar Mehta, Paulo J. M. Monteiro (2006). Concrete : microstructure, properties, and materials. New York, NY : McGraw-Hill ; London, cop. 2006.
       - Chapter 02 – Microstructure of concrete
       - Chapter 05 – Durability of concrete
       - Chapter 06 – Hydraulic cement
       - Chapter 07 – Aggregates
       - Chapter 08 – Admixtures
       - Chapter 09 – Proportioning concrete mixtures
       - Chapter 12 – Progress in concrete technology (special types of concrete)


- [in Finnish] BY 201 Betonitekniikan oppikirja 2004. Julkaisijat: Suomen Betoniyhdistys r.y. Kustantaja: BY-koulutus Oy. Julkaistu: 2012.
- Course lectures and exercises notes and handout

 

Korvaavuudet (voimassa 01.08.2018-31.07.2020): 

Rak-82.3131 Concrete Technology 2

Kurssin kotisivu (voimassa 01.08.2018-31.07.2020): 

https://mycourses.aalto.fi

Esitiedot (voimassa 01.08.2018-31.07.2020): 

CIV-E1010 Building Materials Technology 5 op

Arvosteluasteikko (voimassa 01.08.2018-31.07.2020): 

The grading scale for course is: 5 (highest); 4; 3; 2; 1 (lowest passing grade); 0 (failed).

Ilmoittautuminen (voimassa 01.08.2018-31.07.2020): 

WebOodi, https://oodi.aalto.fi

Opintojakson kuvaus

Ilmoittautuminen ja lisätiedot