Laajuus: 5
Aikataulu: 07.01.2019 - 14.03.2019
Vastuuopettaja (voimassa 01.08.2018-31.07.2020):
Matti Pietola
Kurssin yhteystiedot (koskee tätä kurssikertaa):
Contact person
university teacher Jyrki Kajaste
jyrki.kajaste@aalto.fi
Teacher in charge
professor Matti Pietola
matti.pietola@aalto.fi
Opetusperiodi (voimassa 01.08.2018-31.07.2020):
III - IV (Spring 2019)
Osaamistavoitteet (voimassa 01.08.2018-31.07.2020):
After the course the student is able to:
- Describe technical fundamentals of hydraulic and pneumatic systems
- Describe general characteristics of different pressure mediums
- Analyze the behavior of pressure and flow in hydraulic and pneumatic systems
- Describe the operation and control of hydraulic and pneumatic components, the factors affecting to the operation, and the effect of the components to the system
- Simulate basic hydraulic and pneumatic systems using software packages
- Calculate and analyze hydraulic and pneumatic systems and to draw up diagrams
- Calculate the characteristics/properties of hydraulic and pneumatic components and systems
- Analyze operation of hydraulic and pneumatic systems
- Analyze and draw up diagrams of hydraulic and pneumatic systems
- Build simple hydraulic and pneumatic systems
- Document hydraulic and pneumatic systems
Sisältö (voimassa 01.08.2018-31.07.2020):
General knowledge of fluid power systems
Theoretical background (hydrostatics and hydrodynamics)
Fluids used in fluid opwer systems
Basic components of hydraulic and pneumatic systems
Filtration
Seals and sealing
Systems
Modeling and simulation (basics for the Research tasks)
Measurements and analysis (for Laboratory exercises)
System construction
Tarkennukset kurssin sisältöön (koskee tätä kurssikertaa):
Learning Outcomes
After the course the student is able to:
- Describe technical fundamentals of hydraulic and pneumatic systems
- Describe general characteristics of different pressure mediums
- Analyze the behavior of pressure and flow in hydraulic and pneumatic systems
- Describe the operation and control of hydraulic and pneumatic
components, the factors affecting to the operation, and the effect of
the components to the system
- Simulate basic hydraulic and pneumatic systems using software packages
- Calculate and analyze hydraulic and pneumatic systems and to draw up diagrams
- Calculate the characteristics/properties of hydraulic and pneumatic components and systems
- Analyze operation of hydraulic and pneumatic systems
- Analyze and draw up diagrams of hydraulic and pneumatic systems
- Build simple hydraulic and pneumatic systems
- Document hydraulic and pneumatic systems
ContentGeneral knowledge of fluid power systems
Theoretical background (hydrostatics and hydrodynamics)
Fluids used in fluid opwer systems
Basic components of hydraulic and pneumatic systems
Filtration
Seals and sealing
Systems
Modeling and simulation (basics for the Research tasks)
Measurements and analysis (for Laboratory exercises)
System construction
Toteutus, työmuodot ja arvosteluperusteet (voimassa 01.08.2018-31.07.2020):
Lectures
Two research assignments, group work (2 x 45 %)
One individual research assignments (10 %)
Voluntary calculation exercises (bonus points)
Tarkennetut arviointiperusteet ja -menetelmät ja tutustuminen arviointiin (koskee tätä kurssikertaa):
Assessment Methods and Criteria
Lectures
Two research assignments, group work (2 x 45%)
One individual research assignment (10%)
Voluntary calculation exercises (bonus points)
Työmäärä toteutustavoittain (voimassa 01.08.2018-31.07.2020):
5 cr
Lectures 28 h (2 x 2 h / week)
Laboratory work 6 h (3 x 2 h)
Simulation work 8 h (4 x 2 h)
Voluntary calculation exercises 12 h (6 x 2 h)
Autonomous studying and working on research assignments 81 - 93 h
Tarkennettu kuormittavuuslaskelma (koskee tätä kurssikertaa):
Workload
5 cr
Lectures 28 h (2 x 2 h / week)
Laboratory work 6 h (3 x 2 h)
Simulation work 8 h (4 x 2 h)
Voluntary calculation exercises 12 h (6 x 2 h)
Autonomous studying and working on research assignments 81 -
93 h
Oppimateriaali (voimassa 01.08.2018-31.07.2020):
Announced separately
Tarkennukset oppimateriaaliin (koskee tätä kurssikertaa):
Korvaavuudet (voimassa 01.08.2018-31.07.2020):
Course substitutes Kon-41.3023 Hydrauliikka ja pneumatiikka
Kurssin kotisivu (voimassa 01.08.2018-31.07.2020):
https://mycourses.aalto.fi/
Arvosteluasteikko (voimassa 01.08.2018-31.07.2020):
0 - 5
Ilmoittautuminen (voimassa 01.08.2018-31.07.2020):
WebOodi
Lisätietoja (voimassa 01.08.2018-31.07.2020):
For course news & updates please check MyCourses.
Toteutuksen lisätiedot (koskee tätä kurssikertaa):
:
WebOodi
Further Information:
For course news & updates
please check MyCourses.
Kurssin aikataulu (koskee tätä kurssikertaa):
| weekday | day | time | class | event | week |
| Monday | 7.1. | 12:15-14:00 | 326 | lecture | 2 |
| Thursday | 10.1. | 14:15-16:00 | 202 | lecture | 2 |
| Monday | 14.1. | 12:15-14:00 | 326 | lecture | 3 |
| Thursday | 17.1. | 14:15-16:00 | 202 | lecture | 3 |
| Friday | 18.1. | 12:15-14:00 | 326 | exercise 1 | 3 |
| Monday | 21.1. | 12:15-14:00 | 326 | lecture | 4 |
| Thursday | 24.1. | 14:15-16:00 | 202 | lecture | 4 |
| Friday | 25.1. | 12:15-14:00 | 326 | exercise 2 | 4 |
| Monday | 28.1. | 12:15-14:00 | 326 | lecture | 5 |
| Thursday | 31.1. | 14:15-16:00 | 202 | lecture | 5 |
| Monday | 4.2. | 12:00-14:00 | Maari C-D | simulation exercise | 6 |
| Thursday | 7.2. | 14:00-16:00 | Maari C-D | simulation exercise | 6 |
| Friday | 8.2. | 12:15-14:00 | 326 | exercise 3 | 6 |
| Monday | 11.2. | 12:00-14:00 | Maari C-D | simulation exercise | 7 |
| Thursday | 14.2. | 14:00-16:00 | Maari C-D | simulation exercise | 7 |
| Friday | 15.2. | 12:15-14:00 | 326 | exercise 4 | 7 |
| 8 | |||||
| 8 | |||||
| Monday | 25.2. | 12:15-14:00 | 326 | lecture | 9 |
| Thursday | 28.2. | 14:15-16:00 | 215 | lecture | 9 |
| Friday | 1.3. | 12:15-14:00 | 215 | exercise 5 | 9 |
| Monday | 4.3. | 12:15-14:00 | 326 | lecture | 10 |
| Thursday | 7.3. | 14:15-16:00 | 216 | lecture | 10 |
| Friday | 8.3. | 12:15-14:00 | 326 | exercise 6 | 10 |
| Monday | 11.3. | 12:15-14:00 | 216 | lecture | 11 |
| Thursday | 14.3. | 14:15-16:00 | 326 | lecture | 11 |
- Opettaja: Calonius Olof
- Opettaja: Kajaste Jyrki
- Opettaja: Pietola Matti
- Opettaja: Sillanpää Arttu
- Opettaja: Sinkkonen Antti