Omfattning: 5
Tidtabel: 07.01.2019 - 14.03.2019
Ansvarslärare (är i kraft 01.08.2018-31.07.2020):
Matti Pietola
Kontaktuppgifter till kursens personal (gäller denna kursomgång):
Contact person
university teacher Jyrki Kajaste
jyrki.kajaste@aalto.fi
Teacher in charge
professor Matti Pietola
matti.pietola@aalto.fi
Undervisningsperiod (är i kraft 01.08.2018-31.07.2020):
III - IV (Spring 2019)
Lärandemål (är i kraft 01.08.2018-31.07.2020):
After the course the student is able to:
- Describe technical fundamentals of hydraulic and pneumatic systems
- Describe general characteristics of different pressure mediums
- Analyze the behavior of pressure and flow in hydraulic and pneumatic systems
- Describe the operation and control of hydraulic and pneumatic components, the factors affecting to the operation, and the effect of the components to the system
- Simulate basic hydraulic and pneumatic systems using software packages
- Calculate and analyze hydraulic and pneumatic systems and to draw up diagrams
- Calculate the characteristics/properties of hydraulic and pneumatic components and systems
- Analyze operation of hydraulic and pneumatic systems
- Analyze and draw up diagrams of hydraulic and pneumatic systems
- Build simple hydraulic and pneumatic systems
- Document hydraulic and pneumatic systems
Innehåll (är i kraft 01.08.2018-31.07.2020):
General knowledge of fluid power systems
Theoretical background (hydrostatics and hydrodynamics)
Fluids used in fluid opwer systems
Basic components of hydraulic and pneumatic systems
Filtration
Seals and sealing
Systems
Modeling and simulation (basics for the Research tasks)
Measurements and analysis (for Laboratory exercises)
System construction
Närmare beskrivning av kursens innehåll (gäller denna kursomgång):
Learning Outcomes
After the course the student is able to:
- Describe technical fundamentals of hydraulic and pneumatic systems
- Describe general characteristics of different pressure mediums
- Analyze the behavior of pressure and flow in hydraulic and pneumatic systems
- Describe the operation and control of hydraulic and pneumatic
components, the factors affecting to the operation, and the effect of
the components to the system
- Simulate basic hydraulic and pneumatic systems using software packages
- Calculate and analyze hydraulic and pneumatic systems and to draw up diagrams
- Calculate the characteristics/properties of hydraulic and pneumatic components and systems
- Analyze operation of hydraulic and pneumatic systems
- Analyze and draw up diagrams of hydraulic and pneumatic systems
- Build simple hydraulic and pneumatic systems
- Document hydraulic and pneumatic systems
ContentGeneral knowledge of fluid power systems
Theoretical background (hydrostatics and hydrodynamics)
Fluids used in fluid opwer systems
Basic components of hydraulic and pneumatic systems
Filtration
Seals and sealing
Systems
Modeling and simulation (basics for the Research tasks)
Measurements and analysis (for Laboratory exercises)
System construction
Metoder, arbetssätt och bedömningsgrunder (är i kraft 01.08.2018-31.07.2020):
Lectures
Two research assignments, group work (2 x 45 %)
One individual research assignments (10 %)
Voluntary calculation exercises (bonus points)
Närmare information om bedömningsgrunderna och -metoderna och om hur den studerande kan ta del av bedömningen (gäller denna kursomgång):
Assessment Methods and Criteria
Lectures
Two research assignments, group work (2 x 45%)
One individual research assignment (10%)
Voluntary calculation exercises (bonus points)
Arbetsmängd (är i kraft 01.08.2018-31.07.2020):
5 cr
Lectures 28 h (2 x 2 h / week)
Laboratory work 6 h (3 x 2 h)
Simulation work 8 h (4 x 2 h)
Voluntary calculation exercises 12 h (6 x 2 h)
Autonomous studying and working on research assignments 81 - 93 h
Preciserad belastningsberäkning (gäller denna kursomgång):
Workload
5 cr
Lectures 28 h (2 x 2 h / week)
Laboratory work 6 h (3 x 2 h)
Simulation work 8 h (4 x 2 h)
Voluntary calculation exercises 12 h (6 x 2 h)
Autonomous studying and working on research assignments 81 -
93 h
Studiematerial (är i kraft 01.08.2018-31.07.2020):
Announced separately
Närmare information om kursmaterial (gäller denna kursomgång):
Ersättande prestationer (är i kraft 01.08.2018-31.07.2020):
Course substitutes Kon-41.3023 Hydrauliikka ja pneumatiikka
Kursens webbplats (är i kraft 01.08.2018-31.07.2020):
https://mycourses.aalto.fi/
Bedömningsskala (är i kraft 01.08.2018-31.07.2020):
0 - 5
Anmälning (är i kraft 01.08.2018-31.07.2020):
WebOodi
Tilläggsinformation (är i kraft 01.08.2018-31.07.2020):
For course news & updates please check MyCourses.
Tilläggsinformation om kursen (gäller denna kursomgång):
:
WebOodi
Further Information:
For course news & updates
please check MyCourses.
Närmare information om tidtabellen (gäller denna kursomgång):
weekday | day | time | class | event | week |
Monday | 7.1. | 12:15-14:00 | 326 | lecture | 2 |
Thursday | 10.1. | 14:15-16:00 | 202 | lecture | 2 |
Monday | 14.1. | 12:15-14:00 | 326 | lecture | 3 |
Thursday | 17.1. | 14:15-16:00 | 202 | lecture | 3 |
Friday | 18.1. | 12:15-14:00 | 326 | exercise 1 | 3 |
Monday | 21.1. | 12:15-14:00 | 326 | lecture | 4 |
Thursday | 24.1. | 14:15-16:00 | 202 | lecture | 4 |
Friday | 25.1. | 12:15-14:00 | 326 | exercise 2 | 4 |
Monday | 28.1. | 12:15-14:00 | 326 | lecture | 5 |
Thursday | 31.1. | 14:15-16:00 | 202 | lecture | 5 |
Monday | 4.2. | 12:00-14:00 | Maari C-D | simulation exercise | 6 |
Thursday | 7.2. | 14:00-16:00 | Maari C-D | simulation exercise | 6 |
Friday | 8.2. | 12:15-14:00 | 326 | exercise 3 | 6 |
Monday | 11.2. | 12:00-14:00 | Maari C-D | simulation exercise | 7 |
Thursday | 14.2. | 14:00-16:00 | Maari C-D | simulation exercise | 7 |
Friday | 15.2. | 12:15-14:00 | 326 | exercise 4 | 7 |
8 | |||||
8 | |||||
Monday | 25.2. | 12:15-14:00 | 326 | lecture | 9 |
Thursday | 28.2. | 14:15-16:00 | 215 | lecture | 9 |
Friday | 1.3. | 12:15-14:00 | 215 | exercise 5 | 9 |
Monday | 4.3. | 12:15-14:00 | 326 | lecture | 10 |
Thursday | 7.3. | 14:15-16:00 | 216 | lecture | 10 |
Friday | 8.3. | 12:15-14:00 | 326 | exercise 6 | 10 |
Monday | 11.3. | 12:15-14:00 | 216 | lecture | 11 |
Thursday | 14.3. | 14:15-16:00 | 326 | lecture | 11 |