Laajuus: 5
Aikataulu: 25.02.2019 - 31.05.2019
Vastuuopettaja (voimassa 01.08.2018-31.07.2020):
Juha Huuki
Opetusperiodi (voimassa 01.08.2018-31.07.2020):
IV-V (Spring 2019)
Osaamistavoitteet (voimassa 01.08.2018-31.07.2020):
After the course the student:
1. is able to safely use the most common machine tools under the direct supervision of an instructor.
2. knows the basics of NC-and CAD/CAM-programming including industrial robots.
3. is able to apply knowledge and skills previously taught in the field of production engineering.
4. is able to design and conduct small-scale empirical research.
5. is able to produce a written research report based on the results of the research.
6. has learned collaborative skills in laboratory excercises and writing reports as a part of a small group.
Sisältö (voimassa 01.08.2018-31.07.2020):
Previously taught knowledge and skills in the field of production engineering are applied in hands-on laboratory exercises. The course introduces students to the use of the most common machine tools and the basics of NC- and CAD/CAM -programming. Students work in a small group and conduct small-scale empirical research in various laboratory exercises. The methods and the research results are reported in written research reports.
Toteutus, työmuodot ja arvosteluperusteet (voimassa 01.08.2018-31.07.2020):
Introductory lecture(s), pre-requisite exam and supervised laboratory exercises including the writing of research reports
Työmäärä toteutustavoittain (voimassa 01.08.2018-31.07.2020):
5 cr = 135 h
Introductory lecture/contact hours 4 h
Pre-requisite exam 2 h
Preparing for pre-requisite exam/self-study 22 h
Laboratory excercises/contact hours 16 h
Preparing for laboratory excercises/independent and group working 4 x 8 h = 32 h
Preparing reports/independent and group working 4 x 15 h = 60 h
Korvaavuudet (voimassa 01.08.2018-31.07.2020):
Substitutes for the course Kon-15.3157 Research Basics of Production Engineering (7 cr)
Kurssin kotisivu (voimassa 01.08.2018-31.07.2020):
https://mycourses.aalto.fi/course/search.php?search=MEC-E7003
Esitiedot (voimassa 01.08.2018-31.07.2020):
MEC-E1080 Production Engineering (5 cr)
MEC-E7002 Manufacturing Methods I (5 cr)
Arvosteluasteikko (voimassa 01.08.2018-31.07.2020):
0-5
Ilmoittautuminen (voimassa 01.08.2018-31.07.2020):
via WebOodi.
A maximum of 30 students will be admitted to the course, with precedence given to students of Mechanical Engineering master’s programme and selection is based on academic performance. At least 3 participants are required in order for the course to be held.
- Opettaja: Huuki Juha
- Opettaja: Laakso Sampsa