ELEC-E8407 - Electromechanics, Lecture, 6.9.2022-7.12.2022

Topic outline

• Laboratory works
  Welcome to the Electromechanics Lab. Here you can find all the information concerning the laboratory works. There will be two lab tasks, Transformer and Induction Motor. Each lab has 20% weightage to your course grade.
  
  Our laboratory is located at Otaakari 5L. See the map below. 

  
  

  • 

    Safety Instructions File

    PDF document

    please read these instructions before you come to the laboratory.

    You will have to sign a paper stating that you have read these instructions.
    

  • 

    Lab 1 - Transformer - Group Selection Group choice

    Hi,

    Here you can choose a Group out of the 9 available slots. Maximum 4 persons per group. The lab session will be on 17.10, 18.10, 19.10 and 20.10.2021. There will be three slots available per day (9:00 -11:00; 12:00-14:00; 14:00-16:00). Choose a group by 10.10.2022, 23:59, and choose groups to fill the maximum (4) number. If there are groups with less than 4 members, we will have to re-arrange them.  

    Students who are participating in the course from abroad do not need to choose a group, as they will have a Simulation assignment instead of Laboratory work. 
    

    Note: If none of these three dates are suitable (because of travel or other urgencies), we could make ONE additional session at a later date for those students if there is a minimum of 3 (max 4). Send an email in that case. 
    
    When you arrive at the lab entrance, you can call either Ahmed or Maksim to get in. 
    
    Ahmed: +358 469045530 
    Maksim: +358 465270969 

    
    

    
    

  • 

    Lab 1 - Transformer - Pre-report submission Assignment

    Submit your individual preliminary report here, latest by 14th of October at 23:59. 
    See the attached pdf for instructions about the transformer lab, and pre-report questions.

    All students are required to submit individual pre-report (the same report for those who are taking the physical lab and those who are doing the simulations).

  • 

    Transformer Lab and Simulation Assignment Final Report submission

    Submit the Transformer lab final report here. One report is enough per group for the laboratory work. Include the names and student numbers of all members in the report. 

    Those who are doing the simulation assignment, submit individual reports.

    The deadline for both is 03.11.2022 at 23:59

  • 

    additional material for lab 1 Folder
  • 

    Lab2: Group and slot choice Group choice

    Hi,

    Here you can choose a Group out of the 7 available slots. Maximum 4 persons per group. The lab session will be on 16.11, 17.11, and 18.11.2022. There will be three slots available per day (9:00 -11:00; 12:00-14:00; 14:00-16:00). Choose a group by 14.11.2022, and choose groups to fill the maximum (4) number. If there are groups with less than 4 members, we will have to re-arrange them.  

    Note: If none of these three dates are suitable (because of travel or other urgencies), we could make ONE additional session at a later date for those students if there is a minimum of 3 (max 4). Send an email in that case. 
    

    
    When you arrive at the lab entrance, you can call either me or Taha to get in. 
    
    Taha: +358 403626140 
    Billah: +358 401585354

    
    

    
    
    
  • 

    Lab 2: Induction machines lab, preliminary report submission Assignment
  • 

    Lab 2: Induction machine lab, final report submission Assignment