Esteri 10 -dyeing machine
Do not wash carpets or material other than fabric in the machine.
Operating instructions (wash)
- Switch on the main power and open the taps (3).
- Insert the material and close the cover.
- Select the programme and press start.
- After the programme ends, turn off the taps and switch off the power.
Operating instructions (dyeing)
- Switch on the main power and open the taps (3).
- Add salt to the bottom of the drum.
- Wet the material, place it in the drum and close the cover.
- Measure and dissolve the pigments in boiling water using a separate container. Add a small amount of cold water; the liquid should not be boiling when you pour it into the machine.
- Select the programme and press start.
- While the machine is filling with water, pour in the dyeing liquid through the central detergent compartment.
- Check the resulting shade at the end of the programme and complete a finishing wash (this will also clean the machine for the next user).
- Make sure there are no traces of dye left in the machine. If necessary, run an empty wash cycle with some polyamide fabric.
- Turn off the taps (3) and power.
Last modified: Monday, 25 January 2021, 12:29 PM