Do not wash carpets or material other than fabric in the machine.

Operating instructions (wash)

  1. Switch on the main power and open the taps (3).
  2. Insert the material and close the cover.
  3. Select the programme and press start.
  4. After the programme ends, turn off the taps and switch off the power.

Operating instructions (dyeing)

  1. Switch on the main power and open the taps (3).
  2. Add salt to the bottom of the drum.
  3. Wet the material, place it in the drum and close the cover.
  4. Measure and dissolve the pigments in boiling water using a separate container. Add a small amount of cold water; the liquid should not be boiling when you pour it into the machine.
  5. Select the programme and press start.
  6. While the machine is filling with water, pour in the dyeing liquid through the central detergent compartment.
  7. Check the resulting shade at the end of the programme and complete a finishing wash (this will also clean the machine for the next user).
  8. Make sure there are no traces of dye left in the machine. If necessary, run an empty wash cycle with some polyamide fabric.
  9. Turn off the taps (3) and power.
Last modified: Tuesday, 16 January 2024, 1:39 PM