MUO-E1042 - Printed Fabrics Studio, 26.10.2020-13.11.2020
Kurssiasetusten perusteella kurssi on päättynyt 13.11.2020 Etsi kursseja: MUO-E1042
Info
Printing bases (manufacturer's recommendation)
- 100 % CO
- 50/50 % CO/PES
- silk and viscose
Media thickness
- up 25 mm
Printing plates
Print Area Platen Area FABRIC
S 254x305 mm ~265x315 ~350x400 mm
M 356x406 mm ~367x416 ~450x500 mm
L 406x508 mm ~420x520 ~500x600 mm
File
- TIFF, JPG, PNG tai BMP (JPG is recommended)
- max 2 GB, 10 million pixels
- RGB, CMYK*, grayscale, binary monochrome
- sRGB (recommendation)
- resolution 90-360 ppi
*) PNG and BMP not supported
Depending on the base material and the design, resolution 90-180 ppi is usually sufficient for the file.
When
printing on a dark or colored base fabric, use PNG with a transparent
background if you want the background to be same as fabric color.
When printing on a light colored bases (using preset: Light Color T-Shirt), the white color in the file does not print.
Pre-treatment liquids
Light color fabrics:
In
some cases, light fabrics may also require a pre-treatment. Such
situations may include, for example, spreading the ink on thin silk.
Priming also improves the color fastness of the print and increases the
brightness of the colors.
Use Tubijet Colorfast 10 pre-treatment liquid only on light color fabrics.
Dark color fabrics:
Applying EPSON pre-treatment liquid improves the color development for the ink when printing with white ink (for dark and black colored fabrics).
Synthetic fibers:
Synthetic fibers are usually hydrophobic and therefore they need pre-treatment.
More info is coming later…