OK7 Costume Workshop

Lifting the pressure foot and cutting the thread

• Knee lifter, manual thread cutting.
  

Winding a bobbin

• OBS! Loosen the hand pulley (Fig.6).
  
• Remove the bobbin from the bobbin case and the thread from the needle eye, lift up the presser foot manually.
• Place the bobbin as shown in the figure (Fig.7), spool until full.


• The bobbin rotates clockwise, guide the thread through a small spring.
• The place for the bobbin case is on the front.
• Please see the instruction video (not available yet).

Needles

• Needle position: the long groove of the needle points to the front and the thread goes into the needle eye from front to back.
  
• Needle serie: 134 / DP x 5
  
• Thickness nro: 70 (light), 80 (medium), 90 (heavy).
  

Threading as in straight stitch machines (illustration), except the thread goes into the needle eye from front to back.