Lifting the pressure foot and cutting the thread

  • Knee lifter, manual thread cutting.

Winding a bobbin

  • OBS! Loosen the hand pulley (Fig.6).
  • Remove the bobbin from the bobbin case and the thread from the needle eye, lift up the presser foot manually.
  • Place the bobbin as shown in the figure (Fig.7), spool until full.

  • The bobbin rotates clockwise, guide the thread through a small spring.
  • The place for the bobbin case is on the front.
  • Please see the instruction video (not available yet).

Global puolaus

Needles

  • Needle position: the long groove of the needle points to the front and the thread goes into the needle eye from front to back.
  • Needle serie: 134 / DP x 5
  • Thickness nro: 70 (light), 80 (medium), 90 (heavy).

Threading as in straight stitch machines (illustration), except the thread goes into the needle eye from front to back.

Suoraommelkoneen langoitus_ylälanka

Senast redigerad: tisdag, 16 januari 2024, 13:32