OK7 Set Design Workshop

How to use the machine

1. The machine is always operated with a two-handed grip, and the workpiece must be attached securely (with screw vices) onto the worktable.
2. Start the machine by pressing the power switch to the operating position.
3. You should hold your finger on the control switch during the work to quickly turn off the machine.

Cutting

1. When cutting, the disc is lightly pressed to the part to be cut. The weight of the machine itself is often sufficient for cutting. The machine is driven along the cutting line as the cutting disc grinds the material.
2. The sparks should be directed safely past the user, preferably straight down.
3. Do not direct the sparks towards other people in the room.
4. Be careful when cutting along the cutting line. The cutting disc cannot withstand torque. Bits of the disc may come off and cause a danger to you or others on the premises.

Grinding

1. The slats on the surface of the grinding disc grind the piece when the bottom of the disc is pressed into the piece. A good and even grinding quality is achieved by gently moving the disc during grinding.